This document describes the following software options: R&S®SMBVB-K144 5G NR Release 15 (1423.8608.02), R&S®SMBVB-K148 5G NR Release 16 (1423.8843.02), R&S®SMBVB-K170 5G NR Sidelink (1423.8937.02), R&S®SMM-K171 5G NR Release 17 (1423.9085.02). This manual describes firmware version FW 5.30.047.xx and later of the R&S®SMBV100B.
There is a wealth of information available on oscilloscope basics. You will find helpful resources by searching for topics such as triggering basics, the importance of probing, and proper scaling techniques.
Creating Arbitrary Waveforms Doesn’t Have to be Difficult
At the core of data center issues is the network infrastructure, which can harbor problems either in its components or links.
This application note is based on tests developed by Qorvo application engineering using a Tektronix 6 Series MSO.
PCl Express®, short for Peripheral Component Interconnect Express, is a high-performance and high-bandwidth serial communication interconnect standard.
Achieving the highest possible network analyzer dynamic range is extremely important when characterizing many types of microwave devices, and in some cases, is the key factor in determining measurement performance.
Why do we need to measure EMI emissions? Electromagnetic interference (EMI) is caused by unintentional emissions from electronic equipment.
System developers depend on low-noise amplifiers (LNAs) across various applications including wireless communications, sensor networks, navigation satellites and radio telescopes.
Offering more than 5,000 models of the latest technology from top manufactures. Our equipment always ships Field-Ready with the latest firmware and software, standard and nonstandard accessories, and required calibration.