Keysight Technologies N5247B-423
4-Port, 10 MHz - 67 GHz PNA-X Network Analyzer, 1.85 mm (m)
Rent or Lease
Keysight Technologies – N5247B-423
The Keysight Technologies N5247B-423 is a 4 port network analyzer which offers powerful and versatile solutions for microwave testing for requirements more than 10 GHz. The Keysight Technologies N5247B-423 is a power-packed solution for all your microwave testing needs.
N5247B-423 Product Highlights
- Frequency range: 900 Hz/10 MHz to 67 GHz
- Dynamic Range: 128 to 156 dB
- Output Power: 13 dBm
- 200 measurement channels and unlimited traces
- Number of Built-In Ports: 2 ports
- Linear, log, power, CW, phase, and segment sweeps
- State-of-the-art calibration capabilities
- Flexible triggers for measurement control
- Removable hard drive for secure environments
Keysight Technologies & TRS-RenTelco
TRS-RenTelco is a proud partner of Keysight Technologies and offers a wide range of rental, purchase and leasing solutions designed specifically to meet the evolving needs of the electronic testing industry. Our close relationship with Keysight Technologies allows us to ensure we have the right Network/Impedance Analyzers solution for your job.
Renting Network/Impedance Analyzers
With TRS-RenTelco renting Network/Impedance Analyzers equipment has never been easier. Enjoy same-day shipping, lease, and finance options on our inventory of over 5000 electronic testing equipment rentals. As one of North America’s largest test equipment rental providers, it is our mission to support the endeavors of our clients no matter how big or small with reliable expertise, excellent customer service, accuracy, and speed.
Additional Information
Manufacturer Home Page | Keysight Technologies.
- Configurations
- Resources
- FAQsAI
--, 423
See Configuration Details
-
423
4-port, configurable test set, second source, source attenuators, receiver attenuators, bias tees, combiner, mechanical switches
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Termination U-Wave 50 GHz 2.4 mm(m)
Qty: 1 -
Power cord Right Angle
Qty: 1 -
Wrench Torque 8 in/lb 20 mm Open End
Qty: 1 -
Cable Guard
Qty: 1 -
Cable Guard
Qty: 1 -
Cable Guard
Qty: 1 -
Cable Guard Dual Rear Jumper Cable
Qty: 1 -
Jumper Semi-Rigid 1.85 mm(m) - 1.85 mm(m)
Qty: 16 -
Cover Front Impact Gray
Qty: 1 -
Cover Impact Rear Phantom Gray
Qty: 1 -
USB Drive with Software and Manuals
Qty: 1 -
50 ohm SMA Terminator, male
Qty: 3
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 029, 423, S93029A-1FP
See Configuration Details
-
029
Fully-Corrected Noise-Figure Measurements to 50 GHz
-
423
4-port, configurable test set, second source, source attenuators, receiver attenuators, bias tees, combiner, mechanical switches
-
S93029A-1FP
Noise figure measurements with vector correction,
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Termination U-Wave 50 GHz 2.4 mm(m)
Qty: 1 -
Handle Front Die Cast Gray
Qty: 1 -
Power cord Right Angle
Qty: 1 -
Wrench Torque 8 in/lb 20 mm Open End
Qty: 1 -
Cable Guard
Qty: 1 -
Cable Guard
Qty: 1 -
Cable Guard
Qty: 1 -
Cable Guard Dual Rear Jumper Cable
Qty: 1 -
Jumper Semi-Rigid 1.85 mm(m) - 1.85 mm(m)
Qty: 16 -
USB Drive with Software and Manuals
Qty: 1 -
Cover Front Impact Gray
Qty: 1 -
Cover Impact Rear Phantom Gray
Qty: 1 -
50 ohm SMA Terminator, male
Qty: 3
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 029, 423, S93029A-1FP, S93086A-1FP
See Configuration Details
-
029
Fully-Corrected Noise-Figure Measurements to 50 GHz
-
423
4-port, configurable test set, second source, source attenuators, receiver attenuators, bias tees, combiner, mechanical switches
-
S93029A-1FP
Noise figure measurements with vector correction,
-
S93086A-1FP
Gain Compression
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Termination U-Wave 50 GHz 2.4 mm(m)
Qty: 1 -
Handle Front Die Cast Gray
Qty: 1 -
Power cord Right Angle
Qty: 1 -
Wrench Torque 8 in/lb 20 mm Open End
Qty: 1 -
Cable Guard
Qty: 1 -
Cable Guard
Qty: 1 -
Cable Guard
Qty: 1 -
Cable Guard Dual Rear Jumper Cable
Qty: 1 -
Jumper Semi-Rigid 1.85 mm(m) - 1.85 mm(m)
Qty: 16 -
USB Drive with Software and Manuals
Qty: 1 -
Cover Front Impact Gray
Qty: 1 -
Cover Impact Rear Phantom Gray
Qty: 1 -
50 ohm SMA Terminator, male
Qty: 3
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 029, 423, S93029B, S93029B-KRS, S93029B-R-A5A-001-A
See Configuration Details
-
029
Fully-Corrected Noise-Figure Measurements to 50 GHz
-
423
4-port, configurable test set, second source, source attenuators, receiver attenuators, bias tees, combiner, mechanical switches
-
S93029B
Noise Figure Measurements with Vector Correction
-
S93029B-KRS
Keysight Software Support While On Rent
-
S93029B-R-A5A-001-A
Node-locked perpetual license
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Termination U-Wave 50 GHz 2.4 mm(m)
Qty: 1 -
Handle Front Die Cast Gray
Qty: 1 -
Power cord Right Angle
Qty: 1 -
Adapter Matched 1.85 mm(f) - 1.85 mm(m)
Qty: 1 -
Wrench Torque 8 in/lb 20 mm Open End
Qty: 1 -
Cable Guard
Qty: 1 -
Cable Guard
Qty: 1 -
Cover Front
Qty: 1 -
Cover Rear
Qty: 1 -
Cable Guard
Qty: 1 -
Cable Guard Dual Rear Jumper Cable
Qty: 1 -
Jumper Semi-Rigid 1.85 mm(m) - 1.85 mm(m)
Qty: 16 -
Cable Semi-Rigid Tuner Accessory for M-F Ecal
Qty: 1 -
USB Drive with Software and Manuals
Qty: 1 -
50 ohm SMA Terminator, male
Qty: 3
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 020, 021, 022, 029, 423, S93029B, S93029B-KRS, S93029B-R-A5A-001-A
See Configuration Details
-
020
Add IF inputs
-
021
Add pulse modulator to internal first source
-
022
Add pulse modulator to internal second source
-
029
Fully-Corrected Noise-Figure Measurements to 50 GHz
-
423
4-port, configurable test set, second source, source attenuators, receiver attenuators, bias tees, combiner, mechanical switches
-
S93029B
Noise Figure Measurements with Vector Correction
-
S93029B-KRS
Keysight Software Support While On Rent
-
S93029B-R-A5A-001-A
Node-locked perpetual license
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Termination U-Wave 50 GHz 2.4 mm(m)
Qty: 1 -
Handle Front Die Cast Gray
Qty: 1 -
Power cord Right Angle
Qty: 1 -
Wrench Torque 8 in/lb 20 mm Open End
Qty: 1 -
Cable Guard
Qty: 1 -
Cable Guard
Qty: 1 -
Cable Guard
Qty: 1 -
Cable Guard Dual Rear Jumper Cable
Qty: 1 -
Jumper Semi-Rigid 1.85 mm(m) - 1.85 mm(m)
Qty: 16 -
USB Drive with Software and Manuals
Qty: 1 -
Cover Front Impact Gray
Qty: 1 -
Cover Impact Rear Phantom Gray
Qty: 1 -
50 ohm SMA Terminator, male
Qty: 3
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 020, 423
See Configuration Details
-
020
Add IF inputs
-
423
4-port, configurable test set, second source, source attenuators, receiver attenuators, bias tees, combiner, mechanical switches
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Termination U-Wave 50 GHz 2.4 mm(m)
Qty: 1 -
Power cord Right Angle
Qty: 1 -
Wrench Torque 8 in/lb 20 mm Open End
Qty: 1 -
Cable Guard
Qty: 1 -
Cable Guard
Qty: 1 -
Cable Guard
Qty: 1 -
Cable Guard Dual Rear Jumper Cable
Qty: 1 -
Jumper Semi-Rigid 1.85 mm(m) - 1.85 mm(m)
Qty: 16 -
Cover Front Impact Gray
Qty: 1 -
Cover Impact Rear Phantom Gray
Qty: 1 -
USB Drive with Software and Manuals
Qty: 1
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 020, 029, 423, S93010A-1FP, S93029A-1FP, S93080A-1FP, S93083A-1FP, S93086A-1FP, S93087A-1FP, S930907A-1FP, S93460A-1FP
See Configuration Details
-
020
Add IF inputs
-
029
Fully-Corrected Noise-Figure Measurements to 50 GHz
-
423
4-port, configurable test set, second source, source attenuators, receiver attenuators, bias tees, combiner, mechanical switches
-
S93010A-1FP
Add Time Domain Operation
-
S93029A-1FP
Noise figure measurements with vector correction,
-
S93080A-1FP
Frequency-offset measurements
-
S93083A-1FP
Vector and Scalar Mixer/Converter Measurements
-
S93086A-1FP
Gain-compression measurements
-
S93087A-1FP
Intermodulation distortion measurements
-
S930907A-1FP
Spectrum analysis, up to 67 GHz
-
S93460A-1FP
Add Integrated TMSA Application
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Termination U-Wave 50 GHz 2.4 mm(m)
Qty: 1 -
Power cord Right Angle
Qty: 1 -
Wrench Torque 8 in/lb 20 mm Open End
Qty: 1 -
Cable Guard
Qty: 1 -
Cable Guard
Qty: 1 -
Cable Guard
Qty: 1 -
Cable Guard Dual Rear Jumper Cable
Qty: 1 -
Jumper Semi-Rigid 1.85 mm(m) - 1.85 mm(m)
Qty: 16 -
Cover Front Impact Gray
Qty: 1 -
Cover Impact Rear Phantom Gray
Qty: 1 -
Keyboard USB
Qty: 1 -
Mouse Optical
Qty: 1 -
USB Drive with Software and Manuals
Qty: 1
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 029, 423, S93029B, S93029B-KRS, S93029B-R-A5A-001-A, S93080B, S93080B-KRS, S93080B-R-A5A-001-A, S93089, S93090, S93247B, S93247B-KRS, S93247B-R-A5Q-001-A
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 020, 021, 022, 423, E29, S93029B, S93029B-KRS, S93029B-R-A5A-001-A, SYNV7, XSB
See Configuration Details
-
020
Add IF inputs
-
021
Add pulse modulator to internal 1st source
-
022
Add pulse modulator to internal 2nd source
-
423
4-port, configurable test set, second source, source attenuators, receiver attenuators, bias tees, combiner, mechanical switches
-
S93029B
Noise Figure Measurements with Vector Correction
-
S93029B-KRS
Keysight Software Support While On Rent
-
S93029B-R-A5A-001-A
Node-locked perpetual license
-
SYNV7
Synthesizer and reference assembly, version 7 DDS, dual-source
-
XSB
Third RF source up to 13.5 GHz
-
E29
Fully-Corrected Noise-Figure Measurements to 70 GHz
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Termination U-Wave 50 GHz 2.4 mm(m)
Qty: 1 -
Handle Front Die Cast Gray
Qty: 1 -
Power cord Right Angle
Qty: 1 -
Adapter Matched 1.85 mm(f) - 1.85 mm(m)
Qty: 1 -
Wrench Torque 8 in/lb 20 mm Open End
Qty: 1 -
Cable Guard
Qty: 1 -
Cable Guard
Qty: 1 -
Cover Front
Qty: 1 -
Cover Rear
Qty: 1 -
Cable Guard
Qty: 1 -
Cable Guard Dual Rear Jumper Cable
Qty: 1 -
Jumper Semi-Rigid 1.85 mm(m) - 1.85 mm(m)
Qty: 16 -
Cable Semi-Rigid Tuner Accessory for M-F Ecal
Qty: 1 -
USB Drive with Software and Manuals
Qty: 1 -
50 ohm SMA Terminator, male
Qty: 3
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 008, 021, 022, 029, 423, S93026A-1FP, S93029A-1FP, S93080A-1FP, S93083A-1FP, S93084A-1FP, S93086A-1FP, S93087A-1FP
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 029, 423, S93029A-1FP
See Configuration Details
-
029
Add noise receiver to 50 GHz
-
423
4-port, configurable test set, second source, source attenuators, receiver attenuators, bias tees, combiner, mechanical switches
-
S93029A-1FP
Noise figure measurements with vector correction, fixed perpetual license
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Termination U-Wave 50 GHz 2.4 mm(m)
Qty: 1 -
Power cord Right Angle
Qty: 1 -
Wrench Torque 8 in/lb 20 mm Open End
Qty: 1 -
Cable Guard
Qty: 1 -
Cable Guard
Qty: 1 -
Cable Guard
Qty: 1 -
Jumper Semi-Rigid 1.85 mm(m) - 1.85 mm(m)
Qty: 16 -
Cover Front Impact Gray
Qty: 1 -
Cover Impact Rear Phantom Gray
Qty: 1 -
Keyboard USB
Qty: 1 -
Mouse Optical
Qty: 1 -
USB Drive with Software and Manuals
Qty: 1
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 029, 423, S93010B, S93010B-KRS, S93010B-R-A5A-001-A, S93029B, S93029B-KRS, S93029B-R-A5A-001-A, S93089B, S93089B-KRS, S93089B-R-A5A-001-A, S930907B, S930907B-KRS, S930907B-R-A5A-001-A, SYNV7
See Configuration Details
-
029
Add noise receiver to 50 GHz
-
423
4-port, configurable test set, second source, source attenuators, receiver attenuators, bias tees, combiner, mechanical switches
-
S93010B
Time-domain analysis
-
S93010B-KRS
Keysight Software Support While On Rent
-
S93010B-R-A5A-001-A
Node-locked perpetual license
-
S93029B
Noise figure measurements with vector correction
-
S93029B-KRS
Keysight Software Support While On Rent
-
S93029B-R-A5A-001-A
Node-locked perpetual license
-
S93089B
Differential and I/Q device measurements
-
S93089B-KRS
Keysight Software Support While On Rent
-
S93089B-R-A5A-001-A
Node-locked perpetual license
-
S930907B
Spectrum analysis up to 70 GHz
-
S930907B-KRS
Keysight Software Support While On Rent
-
S930907B-R-A5A-001-A
Node-locked perpetual license
-
SYNV7
Synthesizer version 7
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Termination U-Wave 50 GHz 2.4 mm(m)
Qty: 1 -
Power cord Right Angle
Qty: 1 -
Adapter Matched 1.85 mm(f) - 1.85 mm(m)
Qty: 1 -
Wrench Torque 8 in/lb 20 mm Open End
Qty: 1 -
Cable Guard
Qty: 1 -
Cable Guard
Qty: 1 -
Cable Guard
Qty: 1 -
Cable Guard Dual Rear Jumper Cable
Qty: 1 -
Jumper Semi-Rigid 1.85 mm(m) - 1.85 mm(m)
Qty: 16 -
Cable Semi-Rigid Tuner Accessory for M-F Ecal
Qty: 1 -
Cover Front Impact Gray
Qty: 1 -
Cover Impact Rear Phantom Gray
Qty: 1 -
Keyboard USB
Qty: 1 -
Mouse Optical
Qty: 1 -
USB Drive with Software and Manuals
Qty: 1 -
50 ohm SMA Terminator, male
Qty: 3
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 020, 029, 423, S93010A-1FP, S93029A-1FP, S93080A-1FP, S93083A-1FP, S93086A-1FP, S93087A-1FP
See Configuration Details
-
020
Add IF inputs
-
029
Fully-Corrected Noise-Figure Measurements to 50 GHz
-
423
4-port, configurable test set, second source, source attenuators, receiver attenuators, bias tees, combiner, mechanical switches
-
S93010A-1FP
Add Time Domain Operation
-
S93029A-1FP
Noise figure measurements with vector correction,
-
S93080A-1FP
Frequency-offset measurements
-
S93083A-1FP
Vector and Scalar Mixer/Converter Measurements
-
S93086A-1FP
Gain-compression measurements
-
S93087A-1FP
Intermodulation distortion measurements
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Termination U-Wave 50 GHz 2.4 mm(m)
Qty: 1 -
Power cord Right Angle
Qty: 1 -
Wrench Torque 8 in/lb 20 mm Open End
Qty: 1 -
Cable Guard
Qty: 1 -
Cable Guard
Qty: 1 -
Cable Guard
Qty: 1 -
Cable Guard Dual Rear Jumper Cable
Qty: 1 -
Jumper Semi-Rigid 1.85 mm(m) - 1.85 mm(m)
Qty: 16 -
Cover Front Impact Gray
Qty: 1 -
Cover Impact Rear Phantom Gray
Qty: 1 -
50 ohm SMA Terminator, male
Qty: 3 -
Keyboard USB
Qty: 1 -
Mouse Optical
Qty: 1 -
USB Drive with Software and Manuals
Qty: 1
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 020, 029, 423, S93007A-1FP, S93010A-1FP, S93029A-1FP, S93083A-1FP, S93084A-1FP, S93086A-1FP, S93088A-1FP, S930907A-1FP
See Configuration Details
-
020
Add IF inputs
-
029
Fully-Corrected Noise-Figure Measurements to 50 GHz
-
423
4-port, configurable test set, second source, source attenuators, receiver attenuators, bias tees, combiner, mechanical switches
-
S93007A-1FP
Automatic Fixture Removal
-
S93010A-1FP
Add Time Domain Operation
-
S93029A-1FP
Noise figure measurements with vector correction,
-
S93083A-1FP
Vector and Scalar Mixer/Converter Measurements
-
S93084A-1FP
Embedded-LO capability
-
S93086A-1FP
Gain-compression measurements
-
S93088A-1FP
Source phase control
-
S930907A-1FP
Spectrum analysis, up to 67 GHz
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Termination U-Wave 50 GHz 2.4 mm(m)
Qty: 1 -
Power cord Right Angle
Qty: 1 -
Adapter Matched 1.85 mm(f) - 1.85 mm(m)
Qty: 1 -
Wrench Torque 8 in/lb 20 mm Open End
Qty: 1 -
Cable Guard
Qty: 1 -
Cable Guard
Qty: 1 -
Cable Guard
Qty: 1 -
Cable Guard Dual Rear Jumper Cable
Qty: 1 -
Jumper Semi-Rigid 1.85 mm(m) - 1.85 mm(m)
Qty: 16 -
Cover Front Impact Gray
Qty: 1 -
Cover Impact Rear Phantom Gray
Qty: 1 -
Keyboard USB
Qty: 1 -
Mouse Optical
Qty: 1 -
USB Drive with Software and Manuals
Qty: 1
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 029, 423, S93029A-1FP, S93080A-1FP, S93083A-1FP, S93086A-1FP, S93247B, S93247B-KRS, S93247B-R-A5Q-001-A
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 020, 029, 423, S93029B, S93029B-KRS, S93029B-R-A5A-001-A, S93080B, S93080B-KRS, S93080B-R-A5A-001-A, S93083B, S93083B-KRS, S93083B-R-A5A-001-A, S93086B, S93086B-KRS, S93086B-R-A5A-001-A, SYNV7, UNY, XSB
See Configuration Details
-
029
Fully-Corrected Noise-Figure Measurements to 50 GHz
-
423
4-port, configurable test set, second source, source attenuators, receiver attenuators, bias tees, combiner, mechanical switches
-
S93029B
Noise Figure Measurements with Vector Correction
-
S93029B-KRS
Keysight Software Support While On Rent
-
S93029B-R-A5A-001-A
Node-locked perpetual license
-
S93080B
Frequency-offset measurements
-
S93080B-KRS
Keysight Software Support While On Rent
-
S93080B-R-A5A-001-A
Node-locked perpetual license
-
S93083B
Vector and Scalar Mixer/Converter Measurements
-
S93083B-KRS
Keysight Software Support While On Rent
-
S93083B-R-A5A-001-A
Node-locked perpetual license
-
S93086B
Gain-compression measurements
-
S93086B-KRS
Keysight Software Support While On Rent
-
S93086B-R-A5A-001-A
Node-locked perpetual license
-
020
Add IF inputs
-
SYNV7
Synthesizer version 7
-
UNY
Enhanced low phase noise performance
-
XSB
Third RF source up to 13.5 GHz
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Termination U-Wave 50 GHz 2.4 mm(m)
Qty: 1 -
Power cord Right Angle
Qty: 1 -
Wrench Torque 8 in/lb 20 mm Open End
Qty: 1 -
Cable Guard
Qty: 1 -
Cable Guard
Qty: 1 -
Cable Guard
Qty: 1 -
Jumper Semi-Rigid 1.85 mm(m) - 1.85 mm(m)
Qty: 16 -
Cover Front Impact Gray
Qty: 1 -
Cover Impact Rear Phantom Gray
Qty: 1 -
Keyboard USB
Qty: 1 -
Mouse Optical
Qty: 1 -
USB Drive with Software and Manuals
Qty: 1
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 029, 423, S93029A-1FP, S93247B, S93247B-KRS, S93247B-R-A5Q-001-A, SYNV7
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 020, 029, 423, S93029A-1FP, S93247B, S93247B-KRS, S93247B-R-A5Q-001-A, SYNV7
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 020, 021, 029, 423, S93029B, S93029B-KRS, S93029B-R-A5A-001-A, UNY
See Configuration Details
-
020
Add IF inputs
-
021
Add pulse modulator to internal 1st source
-
029
Fully-Corrected Noise-Figure Measurements to 50 GHz
-
423
4-port, configurable test set, second source, source attenuators, receiver attenuators, bias tees, combiner, mechanical switches
-
S93029B
Noise Figure Measurements with Vector Correction
-
S93029B-KRS
Keysight Software Support While On Rent
-
S93029B-R-A5A-001-A
Node-locked perpetual license
-
UNY
Enhanced low phase noise performance
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Termination U-Wave 50 GHz 2.4 mm(m)
Qty: 1 -
Handle Front Die Cast Gray
Qty: 1 -
Power cord Right Angle
Qty: 1 -
Adapter Matched 1.85 mm(f) - 1.85 mm(m)
Qty: 1 -
Wrench Torque 8 in/lb 20 mm Open End
Qty: 1 -
Cable Guard
Qty: 1 -
Cable Guard
Qty: 1 -
Cover Front
Qty: 1 -
Cover Rear
Qty: 1 -
Cable Guard
Qty: 1 -
Cable Guard Dual Rear Jumper Cable
Qty: 1 -
Jumper Semi-Rigid 1.85 mm(m) - 1.85 mm(m)
Qty: 16 -
Cable Semi-Rigid Tuner Accessory for M-F Ecal
Qty: 1 -
USB Drive with Software and Manuals
Qty: 1 -
50 ohm SMA Terminator, male
Qty: 3
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 020, 029, 423, S93029A-1FP, SYNV7
See Configuration Details
-
020
Add IF inputs
-
029
Fully-Corrected Noise-Figure Measurements to 50 GHz
-
423
4-port, configurable test set, second source, source attenuators, receiver attenuators, bias tees, combiner, mechanical switches
-
S93029A-1FP
Noise figure measurements with vector correction,
-
SYNV7
Synthesizer and reference assembly, version 7 DDS, dual-source
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Termination U-Wave 50 GHz 2.4 mm(m)
Qty: 1 -
Handle Front Die Cast Gray
Qty: 1 -
Power cord Right Angle
Qty: 1 -
Wrench Torque 8 in/lb 20 mm Open End
Qty: 1 -
Cable Guard
Qty: 1 -
Cable Guard
Qty: 1 -
Cable Guard
Qty: 1 -
Cable Guard Dual Rear Jumper Cable
Qty: 1 -
Jumper Semi-Rigid 1.85 mm(m) - 1.85 mm(m)
Qty: 16 -
USB Drive with Software and Manuals
Qty: 1 -
Cover Front Impact Gray
Qty: 1 -
Cover Impact Rear Phantom Gray
Qty: 1 -
50 ohm SMA Terminator, male
Qty: 3
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 021, 022, 423, E29, S93029B, S93029B-KRS, S93029B-R-A5A-001-A
See Configuration Details
-
423
4-port, configurable test set, second source, source attenuators, receiver attenuators, bias tees, combiner, mechanical switches
-
S93029B
Noise Figure Measurements with Vector Correction
-
S93029B-KRS
Keysight Software Support While On Rent
-
S93029B-R-A5A-001-A
Node-locked perpetual license
-
E29
Add noise receiver to 70 GHz
-
021
Add pulse modulator to internal 1st source
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Termination U-Wave 50 GHz 2.4 mm(m)
Qty: 1 -
Handle Front Die Cast Gray
Qty: 1 -
Power cord Right Angle
Qty: 1 -
Wrench Torque 8 in/lb 20 mm Open End
Qty: 1 -
Cable Guard
Qty: 1 -
Cable Guard
Qty: 1 -
Cable Guard
Qty: 1 -
Cable Guard Dual Rear Jumper Cable
Qty: 1 -
Jumper Semi-Rigid 1.85 mm(m) - 1.85 mm(m)
Qty: 16 -
USB Drive with Software and Manuals
Qty: 1 -
Cover Front Impact Gray
Qty: 1 -
Cover Impact Rear Phantom Gray
Qty: 1 -
50 ohm SMA Terminator, male
Qty: 3 -
Adapter Matched 1.85 mm(f) - 1.85 mm(m)
Qty: 1 -
Cable Semi-Rigid Tuner Accessory for M-F Ecal
Qty: 1
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 423, E29, S93029B-KRS, S93029B-R-A5A-001-A, S93209B
See Configuration Details
-
423
4 ort, configurable test set, second source, source attenuators, receiver attenuators, bias tees, mechanical switches
-
E29
Add receiver noise to 70 GHz
-
S93029B-KRS
Keysight software support while on rent
-
S93029B-R-A5A-001-A
Node-locked perpetual license
-
S93209B
Noise figure measurements with vector correction
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Termination U-Wave 50 GHz 2.4 mm(m)
Qty: 1 -
Handle Front Die Cast Gray
Qty: 1 -
Power cord Right Angle
Qty: 1 -
Adapter Matched 1.85 mm(f) - 1.85 mm(m)
Qty: 1 -
Wrench Torque 8 in/lb 20 mm Open End
Qty: 1 -
Cable Guard
Qty: 1 -
Cable Guard
Qty: 1 -
Cover Front
Qty: 1 -
Cover Rear
Qty: 1 -
Cable Guard
Qty: 1 -
Cable Guard Dual Rear Jumper Cable
Qty: 1 -
Jumper Semi-Rigid 1.85 mm(m) - 1.85 mm(m)
Qty: 16 -
Cable Semi-Rigid Tuner Accessory for M-F Ecal
Qty: 1 -
USB Drive with Software and Manuals
Qty: 1 -
50 ohm SMA Terminator, male
Qty: 3
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 423, E29, S93029A-1FP
See Configuration Details
-
423
4 port, configurable test set, second source, source attenuators, receiver attenuators, bias tees, combiner, mechanical switches
-
E29
Add noise receiver to 70 GHz
-
S93029A-1FP
Noise figure measurements with vector correction
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Termination U-Wave 50 GHz 2.4 mm(m)
Qty: 1 -
Handle Front Die Cast Gray
Qty: 1 -
Power cord Right Angle
Qty: 1 -
Wrench Torque 8 in/lb 20 mm Open End
Qty: 1 -
Cable Guard
Qty: 1 -
Cable Guard
Qty: 1 -
Cable Guard
Qty: 1 -
Cable Guard Dual Rear Jumper Cable
Qty: 1 -
Jumper Semi-Rigid 1.85 mm(m) - 1.85 mm(m)
Qty: 16 -
USB Drive with Software and Manuals
Qty: 1 -
Cover Front Impact Gray
Qty: 1 -
Cover Impact Rear Phantom Gray
Qty: 1 -
50 ohm SMA Terminator, male
Qty: 3 -
Adapter Matched 1.85 mm(f) - 1.85 mm(m)
Qty: 1 -
Cable Semi-Rigid Tuner Accessory for M-F Ecal
Qty: 1
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 020, 029, 423, S93007A-1FP, S93010A-1FP, S93029A-1FP, S93083A-1FP, S93084A-1FP, S93086A-1FP, S93088A-1FP, S930907A-1FP
See Configuration Details
-
020
Add IF inputs
-
029
Fully-Corrected Noise-Figure Measurements to 50 GHz
-
423
4-port, configurable test set, second source, source attenuators, receiver attenuators, bias tees, combiner, mechanical switches
-
S93007A-1FP
Automatic Fixture Removal
-
S93010A-1FP
Add Time Domain Operation
-
S93029A-1FP
Noise figure measurements with vector correction,
-
S93083A-1FP
Vector and Scalar Mixer/Converter Measurements
-
S93084A-1FP
Embedded-LO capability
-
S93086A-1FP
Gain-compression measurements
-
S93088A-1FP
Source phase control
-
S930907A-1FP
Spectrum analysis, up to 67 GHz
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Termination U-Wave 50 GHz 2.4 mm(m)
Qty: 1 -
Power cord Right Angle
Qty: 1 -
Adapter Matched 1.85 mm(f) - 1.85 mm(m)
Qty: 1 -
Wrench Torque 8 in/lb 20 mm Open End
Qty: 1 -
Cable Guard
Qty: 1 -
Cable Guard
Qty: 1 -
Cable Guard
Qty: 1 -
Cable Guard Dual Rear Jumper Cable
Qty: 1 -
Jumper Semi-Rigid 1.85 mm(m) - 1.85 mm(m)
Qty: 16 -
Cover Front Impact Gray
Qty: 1 -
Cover Impact Rear Phantom Gray
Qty: 1 -
Keyboard USB
Qty: 1 -
Mouse Optical
Qty: 1 -
USB Drive with Software and Manuals
Qty: 1 -
50 ohm SMA Terminator, male
Qty: 3 -
Cable Semi-Rigid Tuner Accessory for M-F Ecal
Qty: 1
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 021, 022, 029, 423, S93029B, S93029B-KRS, S93029B-R-A5A-001-A
See Configuration Details
-
021
Add pulse modulator to internal 1st source
-
029
Fully-Corrected Noise-Figure Measurements to 50 GHz
-
423
4-port, configurable test set, second source, source attenuators, receiver attenuators, bias tees, combiner, mechanical switches
-
S93029B
Noise Figure Measurements with Vector Correction
-
S93029B-KRS
Keysight Software Support While On Rent
-
S93029B-R-A5A-001-A
Node-locked perpetual license
-
022
Add pulse modulator to internal 2nd source
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Termination U-Wave 50 GHz 2.4 mm(m)
Qty: 1 -
Handle Front Die Cast Gray
Qty: 1 -
Power cord Right Angle
Qty: 1 -
Adapter Matched 1.85 mm(f) - 1.85 mm(m)
Qty: 1 -
Wrench Torque 8 in/lb 20 mm Open End
Qty: 1 -
Cable Guard
Qty: 1 -
Cable Guard
Qty: 1 -
Cover Front
Qty: 1 -
Cover Rear
Qty: 1 -
Cable Guard
Qty: 1 -
Cable Guard Dual Rear Jumper Cable
Qty: 1 -
Jumper Semi-Rigid 1.85 mm(m) - 1.85 mm(m)
Qty: 16 -
Cable Semi-Rigid Tuner Accessory for M-F Ecal
Qty: 1 -
50 ohm SMA Terminator, male
Qty: 3 -
USB Drive with Software and Manuals
Qty: 1
*This item has already been added to your cart. Check your cart for quantity and availability.
Keysight Technologies PNA Configuration Guide
Content is AI-generated. Verify critical details with manufacturer-provided resources.
What is the Keysight N5247B-423 PNA-X and what is it typically used for?
The Keysight N5247B-423 is a PNA-X series microwave vector network analyzer configured as a 4-port system with advanced internal routing and dual sources. The N5247B platform covers 900 Hz to 67 GHz. It is used for S-parameter characterization, component and subsystem verification, and automated RF design validation. Typical rental use cases include measuring gain, return loss, isolation, and group delay on high frequency amplifiers, filters, cables, and multiport devices, and setting up advanced nonlinear or frequency conversion measurements when the correct options are installed.
What does option 423 include on a PNA-X, and why does it matter for real test setups?
Option 423 is a 4-port, dual source configuration with an extended power range, source and receiver attenuators, bias tees, a combiner, mechanical switches, and additional access loops. The internal second source provides an additional signal for two-tone intermodulation testing of amplifiers or as a local oscillator for testing mixers and frequency converters. The mechanical switches and access loops make it easier to reconfigure internal signal paths for advanced measurements without building a complex external RF routing network.
How do the dual internal sources and internal combiner help with two-tone testing?
Two-tone testing requires two RF tones that can be coordinated to evaluate intermodulation products and compression behavior. With option 423, the PNA-X can route source 1 and source 2 through an internal combiner and switches, creating a cleaner and more repeatable two-tone setup with less external combining hardware. This is useful for amplifier linearity screening and for building automated workflows where you need to repeat the same tone spacing and stimulus levels across multiple DUTs.
What calibration approaches are common for a 4-port PNA-X at high frequency?
Calibration depends on connector interface, frequency range, and DUT topology. Common approaches include SOLT with a mechanical calibration kit, TRL when fixtures support transmission line standards, and electronic calibration when available. For 4-port work, make sure your method covers all the port pairings you plan to measure. Use stable test cables, torque connectors correctly, and verify calibration with a known device. At higher frequencies, connector care is part of calibration quality, so inspection and proper handling are essential.
Can I automate measurements and export results for analysis or production screening?
Yes. PNA family analyzers support remote control and automation so you can run sweeps, change switch states, and save results programmatically. Common exports include Touchstone S-parameter files, screenshots, and tabular data for post-processing in RF design tools and scripting environments. For production style screening, you can sequence calibrations, verify power levels, and log pass or fail limits across many DUTs. If your workflow requires pulsed, noise, or frequency offset style measurements, confirm the rental configuration includes the needed licenses and options.
How does the N5247B PNA-X Option 423 support two-tone intermodulation distortion (IMD) testing?
The N5247B Option 423 includes an internal second source, a combiner, and mechanical switches that enable two-tone intermodulation distortion testing without external signal combining equipment. The combiner allows both internal sources to drive port 1 simultaneously, creating the two-tone stimulus needed for IMD measurements on amplifiers and other active devices. Application software S93087B provides dedicated intermodulation distortion measurement capability, while the mechanical switches automatically route the combiner in and out as needed for different measurement configurations across the full 10 MHz to 67 GHz frequency range.
What are practical steps to maximize dynamic range and repeatability in the lab?
Allow warm-up and temperature stabilization, then keep the cabling mechanically stable during sweeps. Use source and receiver attenuation to keep receivers in range and to manage DUT drive levels without overdriving the front end. Always use correct torque and avoid worn connectors. For multiport devices, keep a consistent port mapping and label cables so re-connecting does not change the reference plane. If you see drift or unexpected ripple, re-verify calibration standards and inspect for damaged cables or adapters.
How do I choose between an N5247B-423 4-port system and a 2-port VNA for my project?
Choose the 4-port N5247B-423 when you need simultaneous multiport S-parameters, when your DUT is a coupler, switch, multiport module, or network that benefits from fewer reconnections, or when you want routing flexibility from the access loops and mechanical switches included with option 423. Dual internal sources also make nonlinear and converter measurements easier to configure. A 2-port VNA can be sufficient for simple 2-port devices and may be more cost efficient if you do not need multiport coverage or the advanced internal routing features.
