Base
Accessory Pouch
Qty: 1Marker Band Set Probe Identification 2 Each Of 9 Colors
Qty: 1Cord Power
Qty: 1Cover Front
Qty: 1Probe
Qty: 8Mouse Optical
Qty: 1Manual
Qty: 1Content is AI-generated. Verify critical details with manufacturer-provided resources.
The Tektronix MSO58B is a 2 GHz bandwidth mixed signal oscilloscope from the 5 Series MSO platform, featuring 8 FlexChannel inputs that can each serve as one analog channel or eight digital channels. With a 12-bit ADC, 6.25 GS/s sample rate, and a 15.6-inch HD touchscreen display, it provides high-performance signal analysis for complex embedded system designs.
The MSO58B provides a real-time sample rate of 6.25 GS/s on all analog and digital channels simultaneously, with an interpolated rate up to 500 GS/s. It comes with a standard record length of 62.5 Mpoints on all channels, with an optional upgrade to 125 Mpoints, enabling up to 20 ms of capture duration at the highest sample rate.
The MSO58B supports up to 8 analog channels through its 8 FlexChannel inputs. Each FlexChannel can alternatively be configured as 8 digital channels using the TLP058 logic probe, enabling a maximum of 64 digital channels. This flexibility allows you to configure any mix of analog and digital channels to match your application needs.
The MSO58B provides a comprehensive set of trigger types including Edge, Pulse Width, Runt, Timeout, Window, Logic, Setup and Hold, Rise/Fall Time, Parallel Bus, and Sequence triggers. It also supports optional serial bus triggering on protocols such as I2C, SPI, CAN, LIN, FlexRay, USB 2.0, and Ethernet, with trigger jitter as low as 5 ps RMS for edge-type triggers.
The MSO58B offers optional serial protocol triggering and analysis for I2C, SPI, RS-232/422/485/UART, CAN, LIN, FlexRay, USB 2.0 (LS/FS/HS up to 480 Mb/s), Ethernet 10/100, and Audio buses (I2S, LJ, RJ, TDM). Bus waveforms provide decoded packet views with time-correlated data, and bus decode tables present all packets in a tabular format with time stamps.
The MSO58B features a 15.6-inch HD (1,920 x 1,080) capacitive multi-touch display that supports intuitive pinch, swipe, and zoom gestures. It offers Stacked and Overlay display modes, with the Stacked mode automatically separating each waveform into its own slice while maintaining full ADC resolution for maximum visibility and measurement accuracy.
The MSO58B features a 12-bit ADC that provides 16 times the vertical resolution of traditional 8-bit oscilloscopes. The High Res mode extends vertical resolution up to 16 bits at sample rates of 125 MS/s or below using a hardware FIR filter. At 50 mV/div and full 2 GHz bandwidth (50 ohm), the typical RMS noise is approximately 1.10 mV.
The MSO58B delivers a waveform capture rate exceeding 500,000 waveforms per second using Digital Phosphor technology with FastAcq, enabling rapid discovery of infrequent signal anomalies. It includes 36 automated measurements, DPOJET Essentials for jitter analysis (TIE and Phase Noise), waveform math with advanced equation editing, FFT analysis, and the Wave Inspector search and navigation tools.