Rohde & Schwarz UPV
Audio Analyzer
With its Audio Analyzer R&S UPV, Rohde & Schwarz now offers a compact instrument for virtually all analog and digital audio measurements. To name just a few highlights, the analyzer features digital audio interfaces with sampling rates up to 192 kHz, extended measurement bandwidths, and powerful analysis functions. It is capable of performing multiple measurements with the results presented as informative graphics. The audio analyzer comes with a built-in PC. It is operated via an intuitive Windows user interface. The R&S UPV performs all key measurements that occur in the audio world. Several measurement functions can be performed and displayed simultaneously with analyses carried out as true dual-channel measurements. Further highlights include comprehensive FFT analysis covering up to 256-k points and a measurement bandwidth of up to 250 kHz. The generator provides sinusoidal signals of up to 200 kHz as well as any other desired signals. Filters can be activated for both the generator and the analyzer. The instrument features an FFT noise floor below -140 dB for analog measurements and a dynamic range wider than 170 dB for digital measurements. For those digital measurements, the R&S UPV features an AES/EBU interface with a sampling rate of up to 192 kHz. Additional audio interfaces (e.g., an I2S interface) can easily be installed. As a compact unit with an integrated PC and monitor, the R&S UPV is equipped with all of the important interfaces including a LAN interface and four USB connectors. The instrument is operated via an intuitive Windows user interface either from the front panel or via the keyboard and mouse. The WindowsXP operating system supports the relevant graphic display modes. For example, several measurement diagrams can be displayed simultaneously with selectable size and scaling.
If you are looking for a new or well-maintained used Rohde & Schwarz - UPV audio analyzer for rent, lease or sale contact us or reque
- Configurations
- Resources
--, B1, K4, K6
See Configuration Details
-
B1
Low distortion Generator For Analog Outputs 10 Hz - 185 kHz
-
K4
Option: Remote control for IEC625/IEEE488, RS232 and LAN
-
K6
Extended analysis functions (Software license)
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Cord Power
Qty: 1 -
Adapter Set XLR 3-Pin - BNC(f)
Qty: 2 -
CD Documentation
Qty: 1
*This item has already been added to your cart. Check your cart for quantity and availability.
--, B42, K1, K4
See Configuration Details
-
B42
Universal Serial Interface For Digital Audio Measurements
-
K1
Universal Sequence Controller
-
K4
Remote Control For IEC625/IEEE488, RS232 And LAN
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Cord Power
Qty: 1 -
Adapter Set XLR 3-Pin - BNC(f)
Qty: 2 -
Mouse Optical
Qty: 1 -
Serial InteRFace Universal
Qty: 1 -
CD User Documentation
Qty: 1
*This item has already been added to your cart. Check your cart for quantity and availability.
--, B1, B2, B3, B41, B42, K1, K21, K22, K4, K421, K6, K61, K62, K63, U1, U2, UPL-Z1, UPV
See Configuration Details
-
K22
Jitter And Interface Test Software For Digital Audio, R&S?Upv-B2 Required (Software License)
-
K4
Remote Control For IEC625/IEEE488, RS232 And LAN
-
K421
Pdm Bitstream Analysis, R&S?Upv-B42 Required (Software License)
-
K61
Option: Software For Pesq Measurement. Spech Quality Measurement According To Itu-T Recommendation P.862
-
K62
Option: Software For Peaq Measurement Audio Quality Measurement According To Itu-R Recommendation Bs.1387
-
U1
Modification Analog Generator Change Of Source Impedance From 200 Ohm To 150 Ohm
-
B42
Universal Serial Interface For Digital Audio Measurements, Plug-In Board, Cable And Probe (Hardware Option)
-
B1
Low Distortion Generator For Analog Outputs 10 Hz - 185 kHz
-
B2
Option: Digital Audio I/O 192 Khz Balanced (Xlr), Unbalanced (Bnc), Optical; Aes/Ebu, S/P Dif
-
B3
Option: Second Analog Generator Dc - 80 Khz (Second Output Stage)
-
B41
Option: I2s Interface For Standard Measurements
-
K1
Universal Sequence Controller (Software License)
-
K21
Digital Audio Protocol, Analysis And Generation R&S?Upv-B2 Required
-
K6
Extended Analysis Functions (Software License)
-
U2
Additional Bnc Phone Output Parallel To Headphone Output
-
UPL-Z1
Accessory Adapter Set Xlr-Bnc (2 Male, 2 Female Each)
-
K63
Software For Polqa Measuremen
-
UPV
Accessory Universal Serial Interface For Digital Audio
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Cord Power
Qty: 1 -
Adapter Set XLR 3-Pin - BNC(f)
Qty: 2 -
Mouse Optical
Qty: 1 -
Serial InteRFace Universal
Qty: 1 -
CD User Documentation
Qty: 1
*This item has already been added to your cart. Check your cart for quantity and availability.
--, B1, B2, B3, B41, K21, K4, K61, K62, U1, U2, UPL-Z1
*This item has already been added to your cart. Check your cart for quantity and availability.
--, B1, B3, K4, RM, U2
*This item has already been added to your cart. Check your cart for quantity and availability.
--, B1, B2, B3, B41, B42, K1, K21, K22, K4, K421, K6, K61, K62, K63, U1, U2, UPL-Z1, UPV
See Configuration Details
-
B1
Low distortion Generator For Analog Outputs 10 Hz - 185 kHz
-
B2
Option: Digital Audio I/O 192 kHz balanced (XLR), unbalanced (BNC), optical; AES/EBU, S/P DIF
-
B3
Option: Second Analog Generator DC - 80 kHz (second output stage)
-
B41
Option: I2S Interface for Standard Measurement
-
B42
Option: Universal Serial Interface for Digital Audio Measurement
-
K1
Universal sequence controller
-
K21
Digital Audio Protocol, analysis and generation R&S?UPV-B2 required
-
K22
Jitter and Interface Test Software for Digital Audio, R&S?UPV-B2 required (Software license)
-
K4
Option: Remote control for IEC625/IEEE488, RS232 and LAN
-
K421
PDM bitstream analysis, R&S?UPV-B42 required (Software license)
-
K6
Extended analysis functions (Software license)
-
K61
Option: Software for PESQ Measurement
-
K62
Option: Software for PEAQ Measurement
-
K63
Software for POLQA Measurement
-
U1
Modification Analog Generator change of source impedance from 200 Ohm to 150 Ohm
-
U2
Additional BNC phone output parallel to headphone output
-
UPL-Z1
Accessory Adapter set XLR-BNC (2 male, 2 female each)
-
UPV
Accessory UNIVERSAL Serial Interface FOR Digital Audio
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Adapter Set XLR 3-Pin - BNC(f)
Qty: 2 -
CD User Documentation
Qty: 1 -
Serial InteRFace Universal
Qty: 1 -
Cord Power
Qty: 1 -
Mouse Optical
Qty: 1
*This item has already been added to your cart. Check your cart for quantity and availability.
Rohde & Schwarz UPV Operating Manual
Rohde & Schwarz UPV Spec Sheet
VoLTE and Audio Quality Test - Rohde & Schwarz at LTE North America 2011
