Keysight Technologies N5222B-219
2-port, 10 MHz - 26.5 GHz PNA Network Analyzer, 3.5 mm (m)
Rent or Lease
Keysight Technologies - N5222B-219
10 MHz to 26.5 GHz, 2-ports with one source and 4-ports with two sources, source and receiver attenuators, bias-tees, pulse generators and modulators, noise figure, and best RF performance.
N5222B-219 Product Highlights
• Meet your toughest measurement challenges with the highest-performing microwave network analyzer in the industry.
• Measure S-parameters with the smallest uncertainty and highest stability.
• Efficiently characterize active components with applications that simplify setups.
• Meet your budget and measurement needs by customizing to just the right level of performance.
• Accelerate insight into component behavior using a multitouch display and intuitive user interface.
Keysight Technologies & TRS-RenTelco
TRS-RenTelco is a proud partner of Keysight Technologies and offers a wide range of rental, purchase and leasing solutions designed specifically to meet the evolving needs of the electronic testing industry. Our close relationship with Keysight Technologies allows us to ensure we have the right Network/Impedance Analyzers solution for your job.
Renting Network/Impedance Analyzers
With TRS-RenTelco renting Network/Impedance Analyzers equipment has never been easier. Enjoy same-day shipping, lease, and finance options on our inventory of over 5000 electronic testing equipment rentals. As one of North America’s largest test equipment rental providers, it is our mission to support the endeavors of our clients no matter how big or small with reliable expertise, excellent customer service, accuracy, and speed.
Links to Additional Information
Keysight Technologies Products from TRS-RenTelco
Other Network/Impedance Analyzers from TRS-RenTelco
Keysight Technologies Home Page
- Configurations
- Resources
- FAQsAI
--, 219
See Configuration Details
-
219
2-port with configurable test set, reference mixer switch, source and receiver attenuators, bias tees
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Wrench Torque 8 in/lb 20 mm Open End
Qty: 1 -
Cable RF Front-Rear Panel Jumper SMA(m) - SMA(m)
Qty: 6 -
Power cord Right Angle
Qty: 1 -
Cover Front
Qty: 1 -
Cover Rear
Qty: 1 -
USB Drive with Software and Manuals
Qty: 1 -
Cable Guard
Qty: 2 -
Handle Front Die Cast Gray
Qty: 1 -
50 ohm SMA Terminator, male
Qty: 2
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 219, S93083B, S93083B-R-A5A-001-A
See Configuration Details
-
219
2-port with configurable test set, reference mixer switch, source and receiver attenuators, bias tees
-
S93083B-R-A5A-001-A
Node-locked perpetual license
-
S93083B
Vector and Scalar Mixer/Converter Measurements
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Wrench Torque 8 in/lb 20 mm Open End
Qty: 1 -
Cable RF Front-Rear Panel Jumper SMA(m) - SMA(m)
Qty: 6 -
Power cord Right Angle
Qty: 1 -
Cover Front
Qty: 1 -
Cover Rear
Qty: 1 -
USB Drive with Software and Manuals
Qty: 1 -
Cable Guard
Qty: 2 -
Handle Front Die Cast Gray
Qty: 1
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 219, S93080A-1FP, S93083A-1FP
See Configuration Details
-
219
2-port with configurable test set, reference mixer switch, source and receiver attenuators, bias tees
-
S93080A-1FP
Frequency-offset measurements
-
S93083A-1FP
Vector and Scalar Mixer/Converter Measurements
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Handle Front Die Cast Gray
Qty: 1 -
Power cord Right Angle
Qty: 1 -
Wrench Torque 8 in/lb 20 mm Open End
Qty: 1 -
Cable RF Front-Rear Panel Jumper SMA(m) - SMA(m)
Qty: 6 -
Cable Guard
Qty: 2 -
Cover Front
Qty: 1 -
Cover Rear
Qty: 1 -
USB Drive with Software and Manuals
Qty: 1
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 020, 219
See Configuration Details
-
020
Add IF inputs
-
219
2-port with configurable test set, reference mixer switch, source and receiver attenuators, bias tees
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Handle Front Die Cast Gray
Qty: 1 -
Power cord Right Angle
Qty: 1 -
Wrench Torque 8 in/lb 20 mm Open End
Qty: 1 -
Cable RF Front-Rear Panel Jumper SMA(m) - SMA(m)
Qty: 6 -
Cable Guard
Qty: 2 -
Cover Front
Qty: 1 -
Cover Rear
Qty: 1 -
USB Drive with Software and Manuals
Qty: 1 -
50 ohm SMA Terminator, male
Qty: 2
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 021, 219, SYNV7
See Configuration Details
-
021
Add pulse modulator to internal 1st source
-
219
2-port with configurable test set, reference mixer switch, source and receiver attenuators, bias tees
-
SYNV7
Synthesizer 7.0
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Handle Front Die Cast Gray
Qty: 1 -
Power cord Right Angle
Qty: 1 -
Wrench Torque 8 in/lb 20 mm Open End
Qty: 1 -
Cable RF Front-Rear Panel Jumper SMA(m) - SMA(m)
Qty: 6 -
Cable Guard
Qty: 2 -
Cover Front
Qty: 1 -
Cover Rear
Qty: 1 -
USB Drive with Software and Manuals
Qty: 1 -
50 ohm SMA Terminator, male
Qty: 2
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 219, SYNV7
See Configuration Details
-
219
2-port with configurable test set, reference mixer switch, source and receiver attenuators, bias tees
-
SYNV7
Synthesizer 7.0
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Handle Front Die Cast Gray
Qty: 1 -
Power cord Right Angle
Qty: 1 -
Wrench Torque 8 in/lb 20 mm Open End
Qty: 1 -
Cable RF Front-Rear Panel Jumper SMA(m) - SMA(m)
Qty: 6 -
Cable Guard
Qty: 2 -
Cover Front
Qty: 1 -
Cover Rear
Qty: 1 -
USB Drive with Software and Manuals
Qty: 1 -
50 ohm SMA Terminator, male
Qty: 2
*This item has already been added to your cart. Check your cart for quantity and availability.
Keysight Technologies N5222B Spec Sheet
Keysight Technologies N52xxB Configuration Guide
Keysight Technologies PNA Configuration Guide
Content is AI-generated. Verify critical details with manufacturer-provided resources.
What additional hardware does Option 219 include on the N5222B?
The N5222B with Option 219 adds front-panel jumpers, R1 receiver switch, source and receiver attenuators for extended power range, and bias-tees. The bias-tees enable DC bias injection for active device testing such as amplifiers and mixers, while the attenuators extend the power sweep range and protect receivers from high input levels.
How do the bias-tees in Option 219 benefit active device characterization?
The integrated bias-tees in Option 219 allow simultaneous application of DC power and RF signals to the device under test without external bias equipment. This is essential for characterizing active components like transistors, amplifiers, and frequency converters that require DC operating points while performing S-parameter measurements across the full 10 MHz to 26.5 GHz range.
What is the extended power range capability of the N5222B-219?
Option 219 includes both source and receiver attenuators that extend the usable power range of the analyzer. The minimum settable power reaches -95 dBm compared to -30 dBm on the base Option 200 model, and the source attenuators allow precise low-power testing for sensitive device characterization while receiver attenuators prevent compression from high-power signals.
How do front-panel jumpers enhance measurement flexibility on the N5222B-219?
Front-panel jumpers provide direct access to internal signal paths including source outputs, receiver inputs, and reference receivers. This enables advanced measurement configurations such as external mixing, amplifier insertion for extended dynamic range, external filtering, and custom test setups that require access to intermediate signal paths not available on standard test ports.
What system dynamic range does the N5222B-219 achieve?
The N5222B with Option 219 achieves specified system dynamic range of 127 dB from 500 MHz to 16 GHz and 124 dB from 16 to 20 GHz. From 20 to 24 GHz the dynamic range is 121 dB, and from 24 to 26.5 GHz it is 109 dB. Typical performance exceeds these specifications, reaching 138 dB from 500 MHz to 2 GHz.
What corrected measurement accuracy does the N5222B-219 deliver after calibration?
After full 2-port calibration with the 85052B mechanical cal kit, the N5222B-219 achieves directivity of 44 dB and source match of 31 dB from 2 to 26.5 GHz. Reflection tracking magnitude is ±0.006 dB with ±0.040 degrees phase, while transmission tracking magnitude ranges from ±0.091 dB at lower frequencies to ±0.119 dB from 20 to 26.5 GHz.
What measurement applications benefit most from the N5222B-219 configuration?
Option 219 is optimized for active device characterization including amplifier gain compression, mixer conversion loss, and frequency converter measurements. The combination of bias-tees for DC biasing, extended power range via source and receiver attenuators, and front-panel jumper access makes it ideal for semiconductor validation and nonlinear component testing environments.
What is the preset power level for the N5222B with Option 219?
The preset (nominal) power for Option 219 is -5 dBm, compared to 0 dBm on the base Option 200 model. This lower preset power is a safety feature that accounts for the receiver attenuators and bias-tees in the signal path, helping to protect sensitive devices under test from excessive power levels during initial setup.