Keysight Technologies N5193A-520
10 MHz - 20 GHz UXG Agile Signal Generator, 3.5 mm (m)
Rent or Lease
Keysight Technologies - N5193A-520
The Keysight Technologies N5193A-520 is a 20 GHz UXG Agile Signal Generator.
N5193A-520 Product Highlights
- 10 MHz to 20 GHz
- 10 dBm output power standard; optional attenuator with 80 dB agile range and -130 dBm minimum settable power
- 100 micros switching speed standard
- -126 dBc/Hz typical phase noise at 10 kHz offset at 10 GHz carrier
- Modulation and list capabilities:
- AM, FM, FM, pulse modulation, and wideband chirps
- 3 ns pulse rise/fall time and 10 ns pulse widths
- List mode and agile controller mode standard
- Automation and communication interface:
- 1000BaseT LAN, USB 2.0, and GPIB
- LXI compliant
- SCPI and IVI-COM drivers
- Code-compatibility with Aeroflex fast switching signal generators
Keysight Technologies & TRS-RenTelco
TRS-RenTelco is a proud partner of Keysight Technologies and offers a wide range of rental, purchase and leasing solutions designed specifically to meet the evolving needs of the electronic testing industry. Our close relationship with Keysight Technologies allows us to ensure we have the right Generators solution for your job.
Renting Generators
With TRS-RenTelco renting Generators equipment has never been easier. Enjoy same-day shipping, lease, and finance options on our inventory of over 5000 electronic testing equipment rentals. As one of North America’s largest test equipment rental providers, it is our mission to support the endeavors of our clients no matter how big or small with reliable expertise, excellent customer service, accuracy, and speed.
Additional Information
Manufacturer Home Page | Keysight Technologies.
- Configurations
- Resources
- FAQsAI
--, 520, AT1, CC1, PM1, SS2
See Configuration Details
-
AT1
Add mechanical + solid state attenuator assembly
-
CC1
100-pin I/O interface (for binary input)
-
SS2
180ns PDW update rate (normal or list mode) or 370ns latency (fast CW mode)
-
PM1
Pulse modulation
-
520
Frequency range, 10 MHz to 20 GHz
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Cord Power
Qty: 1 -
Adapter APC 3.5 mm(f) - APC 3.5 mm(f)
Qty: 1 -
Module Data Port Interface
Qty: 1 -
Cable Assembly Semi-Rigid Jumper 6 GHz
Qty: 1 -
Hard Drive Internal SSD
Qty: 1 -
Manual Set
Qty: 1
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 520, AT1, CC1, PM1, SS2, UNT
See Configuration Details
-
520
Frequency range, 10 MHz to 20 GHz
-
AT1
Add mechanical + solid state attenuator assembly
-
CC1
100-pin I/O interface (for binary input)
-
PM1
Pulse modulation
-
SS2
180ns PDW update rate (normal or list mode) or 370ns latency (fast CW mode)
-
UNT
AM, FM, phase modulation, LF output, and narrowband chirp
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Cord Power
Qty: 1 -
Adapter APC 3.5 mm(f) - APC 3.5 mm(f)
Qty: 1 -
Module Data Port Interface
Qty: 1 -
Cable Assembly Semi-Rigid Jumper 6 GHz
Qty: 1 -
Hard Drive Internal SSD
Qty: 1 -
Manual Set
Qty: 1
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 520, AT2, CC2, FR1, PM1, SS4, UNT
See Configuration Details
-
520
Frequency range, 10 MHz to 20 GHz
-
AT2
Add mechanical + solid state attenuator assembly
-
CC2
50-pin I/O interface (for BCD input)
-
FR1
0.001 Hz frequency resolution
-
PM1
Pulse modulation
-
SS4
180 ns PDW Update Rate (Normal or List Mode) or 370ns Latency (fast CW mode)
-
UNT
AM, FM, phase modulation, LF output, and narrowband chirp
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Cord Power
Qty: 1 -
Adapter APC 3.5 mm(f) - APC 3.5 mm(f)
Qty: 1 -
Cable Assembly Semi-Rigid Jumper 6 GHz
Qty: 1 -
Hard Drive Internal SSD
Qty: 1 -
Manual Set
Qty: 1
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 520, AT1, CC1, EP1, PM1, SS4, SSD, UNT, WC1
See Configuration Details
-
CC1
100-pin I/O interface (for binary input)
-
520
Frequency range, 10 MHz to 20 GHz
-
AT1
Add mechanical + solid state attenuator assembly
-
EP1
Enhanced phase nosie
-
PM1
Pulse modulation
-
SS4
180 ns PDW Update Rate (Normal or List Mode) or 370ns Latency (fast CW mode)
-
SSD
Removable Solid-State Drive
-
UNT
AM, FM, phase modulation, LF output, and narrowband chirp
-
WC1
Wideband chirp
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Cord Power
Qty: 1 -
Adapter APC 3.5 mm(f) - APC 3.5 mm(f)
Qty: 1 -
Module Data Port Interface
Qty: 1 -
Cable Assembly Semi-Rigid Jumper 6 GHz
Qty: 1 -
Hard Drive Internal SSD
Qty: 1 -
Manual Set
Qty: 1
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 520, AT2, CC1, EP1, FR1, PM1, SS4, UNT, WC1
See Configuration Details
-
AT2
Add mechanical + solid state attenuator assembly
-
520
Frequency range, 10 MHz to 20 GHz
-
CC1
100-pin I/O interface (for binary input)
-
EP1
Enhanced phase nosie
-
FR1
0.001 Hz frequency resolution
-
PM1
Pulse modulation
-
SS4
180 ns PDW Update Rate (Normal or List Mode) or 370ns Latency (fast CW mode)
-
UNT
AM, FM, phase modulation, LF output, and narrowband chirp
-
WC1
Wideband chirp
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Cord Power
Qty: 1 -
Adapter APC 3.5 mm(f) - APC 3.5 mm(f)
Qty: 1 -
Module Data Port Interface
Qty: 1 -
Cable Assembly Semi-Rigid Jumper 6 GHz
Qty: 1 -
Hard Drive Internal SSD
Qty: 1 -
Manual Set
Qty: 1
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 520, AT2, CC3, EP1, FR1, PM1, SS4, UNT, WC1
See Configuration Details
-
520
Frequency range, 10 MHz to 20 GHz
-
AT2
Add mechanical + solid state attenuator assembly
-
CC3
10 Gigabit Ethernet I/O interface
-
EP1
Enhanced phase nosie
-
FR1
0.001 Hz frequency resolution
-
PM1
Pulse modulation
-
SS4
180 ns PDW Update Rate (Normal or List Mode) or 370ns Latency (fast CW mode)
-
UNT
AM, FM, phase modulation, LF output, and narrowband chirp
-
WC1
Wideband chirp
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Cord Power
Qty: 1 -
Adapter APC 3.5 mm(f) - APC 3.5 mm(f)
Qty: 1 -
Module Data Port Interface
Qty: 1 -
Cable Assembly Semi-Rigid Jumper 6 GHz
Qty: 1 -
Hard Drive Internal SSD
Qty: 1 -
Manual Set
Qty: 1
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 520, AT2, CC1, PM1, SS1, UNT, WC1
See Configuration Details
-
SS1
1 microsecond switching speed
-
520
Frequency range, 10 MHz to 20 GHz
-
AT2
Add mechanical + solid state attenuator assembly
-
CC1
100-pin I/O interface (for binary input)
-
PM1
Pulse modulation
-
UNT
AM, FM, phase modulation, LF output, and narrowband chirp
-
WC1
Wideband chirp
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Cord Power
Qty: 1 -
Adapter APC 3.5 mm(f) - APC 3.5 mm(f)
Qty: 1 -
Module Data Port Interface
Qty: 1 -
Cable Assembly Semi-Rigid Jumper 6 GHz
Qty: 1 -
Hard Drive Internal SSD
Qty: 1 -
Manual Set
Qty: 1
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 520, AT1, CC1, EP1, FR1, PM1, SS2, UNT
See Configuration Details
-
520
Frequency range, 10 MHz to 20 GHz
-
AT1
Add mechanical + solid state attenuator assembly
-
CC1
100-pin I/O interface (for binary input)
-
EP1
Enhanced phase nosie
-
FR1
0.001 Hz frequency resolution
-
PM1
Pulse modulation
-
SS2
180ns PDW update rate (normal or list mode) or 370ns latency (fast CW mode)
-
UNT
AM, FM, phase modulation, LF output, and narrowband chirp
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Cord Power
Qty: 1 -
Hard Drive Internal SSD
Qty: 1 -
Adapter APC 3.5 mm(f) - APC 3.5 mm(f)
Qty: 1 -
Module Data Port Interface
Qty: 1 -
Cable Assembly Semi-Rigid Jumper 6 GHz
Qty: 1 -
Manual Set
Qty: 1
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 520, PM1, SS2
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 520, AT1, CC1, EP1, FR1, PM1, SS2, UNT, WC1
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 520, AT1, CC1, EP1, PM1, SS2
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 520, AT1, CC1, EP1, FR1, PM1, SS2, UNT
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 520, AT2, CC1, SS4
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 520, AT2, CC1, EP1, FR1, PM1, SS4, UNT
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 520, CC1, FR1, PM1, SS4, UNT
See Configuration Details
-
520
Frequency range, 10 MHz to 20 GHz
-
CC1
100-pin I/O interface (for binary input)
-
FR1
0.001 Hz frequency resolution
-
PM1
Pulse modulation
-
SS4
180 ns PDW Update Rate (Normal or List Mode) or 370ns Latency (fast CW mode)
-
UNT
AM, FM, phase modulation, LF output, and narrowband chirp
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Cord Power
Qty: 1 -
Adapter APC 3.5 mm(f) - APC 3.5 mm(f)
Qty: 1 -
Module Data Port Interface
Qty: 1 -
Cable Assembly Semi-Rigid Jumper 6 GHz
Qty: 1 -
Manual Set
Qty: 1
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 520, AT2, CC1, N7660EMBC, N7660EMBC-KRS, N7660EMBC-R-Y5B-001-A, PM1, SS1, UNT, WC1
See Configuration Details
-
520
Frequency range, 10 MHz to 20 GHz
-
AT2
Add mechanical + solid state attenuator assembly
-
CC1
100-pin I/O interface (for binary input)
-
N7660EMBC
Signal Studio for MESG
-
N7660EMBC-R-Y5B-001-A
Node-locked perpetual license
-
PM1
Pulse modulation
-
SS1
1 microsecond switching speed
-
UNT
AM, FM, phase modulation, LF output, and narrowband chirp
-
WC1
Wideband chirp
-
N7660EMBC-KRS
Keysight Software Support While On Rent
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Cord Power
Qty: 1 -
Hard Drive Internal SSD
Qty: 1 -
Adapter APC 3.5 mm(f) - APC 3.5 mm(f)
Qty: 1 -
Module Data Port Interface
Qty: 1 -
Cable Assembly Semi-Rigid Jumper 6 GHz
Qty: 1 -
Manual Set
Qty: 1
*This item has already been added to your cart. Check your cart for quantity and availability.
--, 520, AT1, CC1, PM1, SS2, UNT, WC1
See Configuration Details
-
520
Frequency range, 10 MHz to 20 GHz
-
AT1
Add mechanical + solid state attenuator assembly
-
CC1
100-pin I/O interface (for binary input)
-
PM1
Pulse modulation
-
SS2
180ns PDW update rate (normal or list mode) or 370ns latency (fast CW mode)
-
UNT
AM, FM, phase modulation, LF output, and narrowband chirp
-
WC1
Wideband chirp
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Cord Power
Qty: 1 -
Hard Drive Internal SSD
Qty: 1 -
Adapter APC 3.5 mm(f) - APC 3.5 mm(f)
Qty: 1 -
Module Data Port Interface
Qty: 1 -
Cable Assembly Semi-Rigid Jumper 6 GHz
Qty: 1 -
Manual Set
Qty: 1 -
USB Software I/O Libraries
Qty: 1
*This item has already been added to your cart. Check your cart for quantity and availability.
Content is AI-generated. Verify critical details with manufacturer-provided resources.
What is the frequency range of the Keysight N5193A-520 signal generator?
The N5193A with Option 520 covers a specified frequency range from 10 MHz to 20 GHz, with a tunable range extending to 21.5 GHz. The unit provides continuous wave (CW) frequency resolution of 10 kHz as standard, which can be enhanced to 0.001 Hz resolution with Option FR1 for applications requiring ultra-fine frequency control.
How does the N5193A UXG achieve phase continuous switching?
The N5193A features advanced frequency switching modes including phase continuous switching, which minimizes phase changes and spectral splatter when transitioning to a new frequency within a band. Additionally, phase coherent switching mode returns to the prior phase trajectory when revisiting a frequency under the same setup conditions, though some temporary amplitude and phase changes may occur during transitions.
What timebase accuracy does the N5193A internal reference oscillator provide?
The internal timebase reference oscillator delivers an initial calibration accuracy of ±5 x 10^-8 with an aging rate of ±3 x 10^-8 per year or ±2.5 x 10^-10 per day after 30 days. Temperature effects are ±4.5 x 10^-9 from 0 to 55 degrees Celsius, ensuring stable frequency reference performance across environmental conditions.
Can the N5193A accept an external frequency reference?
Yes, the N5193A accepts a 10 MHz external reference input with an input amplitude of 6 dBm ±6 dB into a 50 ohm impedance. The lock range is ±1.0 ppm, and the reference can be manually or automatically selected. For optimal phase noise performance, use 6 dBm ±2 dB input levels.
What reference outputs are available on the N5193A-520?
The N5193A provides a user-selectable reference output of either 10 MHz or 100 MHz at 7 dBm nominal output power into a 50 ohm load. This reference output enables synchronization with other test equipment and maintains timing coherence across multi-instrument setups.
How does modulation band hold work on the UXG signal generator?
The N5193A employs Frequency Mode A with multiple modulation band regions to maintain consistent modulation bandwidth capabilities across the frequency range. The architecture divides the spectrum into regions where modulation parameters can be held constant, enabling predictable performance for complex modulation schemes throughout different frequency bands from 10 MHz up to 20 GHz on the Option 520.
What electronic frequency control range does the N5193A support?
The N5193A features electronic frequency control (EFC) with a sensitivity of approximately -0.04 ppm per volt from -10 V to +10 V. This allows external control of the timebase frequency for applications requiring dynamic frequency adjustment or synchronization with specialized timing systems.
Does the N5193A-520 require a warm-up period for specifications?
Yes, specifications apply after a 1 hour warm-up period following storage for a minimum of 2 hours within the operating temperature range of 0 to 55 degrees Celsius. All specifications include measurement uncertainty and represent warranted performance of a calibrated instrument under these conditions.