AR RF/Microwave Instrumentation 150W1000
150 Watt CW, 80 Mhz - 1000 MHz Amplifier, Type N (f)
The Model 150W1000 is a portable, self-contained, air-cooled, broadband, completely solid-state amplifier designed for applications where instantaneous bandwidth, high gain and linearity are required. Push-pull circuitry is utilized in all high power stages in the interest of lowering distortion and improving stability. The Model 150W1000, when used with a sweep generator, will provide a minimum of 150 watts of RF power. The Model 150W1000 is equipped with a Digital Control Panel (DCP) which provides both local and remote control of the amplifier. The DCP uses a digital display, menu assigned softkeys, a single rotary knob, and four dedicated switches (POWER, STANDBY, OPERATE and FAULT/RESET) to offer extensive control and status reporting capability. The display provides operational presentation of Forward Power and Reflected Power plus control status and reports of internal amplifier status. Special features include a gain control, internal/external automatic level control (ALC) with front panel control of the ALC threshold, pulse input capability and RF output level protection. Also included is an internal RF detector which provides an output for use in self-testing or operational modes. Protection is provided by DC current level sensing and individual fusing of all output stages. All amplifier control functions and status indications are available remotely in GPIB / IEEE-488 and RS-232 format. The buss interface connector is located on the back panel and positive control of local or remote operation is assured by a keylock on the front panel of the amplifier. Housed in a stylish, contemporary bench top enclosure, the Model 150W1000 provides readily available RF power for typical applications such as RF susceptibility testing, antenna and component testing, watt meter calibration, and as a driver for frequency multipliers and higher power amplifiers. A safety interlock can be implemented via a rear panel connector. OUTPUT POWER (Watts)
Read More
- Configurations
- Resources
- FAQsAI
M5
See Configuration Details
-
M5
Non-adjustable Gain control
Standard Rental Accessories*
* Leased or Buy Used product accessories will be confirmed with quote.
-
Cord Power
Qty: 1 -
CD Documentation and Software
Qty: 1 -
Key for Keylock Switch
Qty: 1
*This item has already been added to your cart. Check your cart for quantity and availability.
AR RF/Microwave Instrumentation 150W1000 Spec Sheet
Content is AI-generated. Verify critical details with manufacturer-provided resources.
What is the AR RF/Microwave Instrumentation 150W1000?
The 150W1000 is a solid-state, air-cooled, broadband amplifier designed for applications requiring instantaneous bandwidth, high gain, and linearity. It is capable of providing a minimum of 150 watts of RF power across the frequency range of 80MHz to 1000MHz.
What are the typical applications for the 150W1000?
Typical applications include RF susceptibility testing, antenna and component testing, watt meter calibration, and serving as a driver for frequency multipliers and higher power amplifiers.
What are the key features of the 150W1000 amplifier?
Key features include a Digital Control Panel (DCP) for local and remote control, push-pull circuitry in high power stages to lower distortion and improve stability, gain control, internal/external ALC with front panel control, pulse input capability, and RF output level protection.
What is the rated output power of the 150W1000?
The rated output power is 150 watts, with the amplifier capable of delivering up to 180 watts linearly at 3dB compression and 140 watts linearly at 1dB compression.
How does the 150W1000 handle mismatched loads?
The amplifier is designed to operate without damage or oscillation with any magnitude and phase of source and load impedance, with a capability to limit reflected power to 100 watts.
What are the modulation capabilities of the 150W1000?
The 150W1000 can faithfully reproduce AM, FM, or pulse modulation appearing on the input signal.
What is the gain and gain adjustment range of the 150W1000?
The amplifier provides a minimum gain of 52 dB, with a continuous gain adjustment range of 18 dB minimum, allowing for precise control over the output power.
What are the remote interfaces available for the 150W1000?
The amplifier includes GPIB/IEEE-488 and RS-232 interfaces for full remote control of all amplifier functions.
What cooling method is employed in the 150W1000?
The 150W1000 uses forced air cooling with self-contained fans to ensure reliable operation under continuous use.
What are the model configurations available for the 150W1000?
The amplifier is available in several configurations (M1 through M7), differing in aspects like RF input/output connector locations and rack-mounting options. Some models also feature fixed gain control, set to maximum gain.